The10th Mountain patchin cutout vinyl. Intended for vehicle windows but can be used on any smooth surface. White and lighter colors show better on back vehicle windows.
Sizeordered is height including any added tabs.
ADDING TABS:We have the options for Arctic, Sniper and Sapper tabs, but also have Ranger and other tabs.
Choose size
Choose from tab options
Choose color
Add to cart
Annotate any changes (color, specific size, tabs wanted)
Have an idea for a decal, send me a custom request.
Basic Instructions can be found at Decal Instructions 1. Peel paper off back 2. Place decal in desired location 3. Slowly peel transfer tape off. 4. Let set for a few days before washing.
It’s so hard to find some of the “not normal” tab combos with certain unit patches let alone quality ones. This was awesome…thank you for keeping the sniper tab in the mix, we’re out here!!
Drawer Title
Choosing a selection results in a full page refresh.
This website uses cookies to ensure you get the best experience on our website.
Similar Products
Ryan
Excellent quality decal
Jason custom made this decal for me and I could not be happier. His decals are way better quality and much easier to apply than others. They don't stick to the paper when you're going to apply the decal and they stick to the glass when you're peeling the applicator back. I will go Milvec for all my decals from now on!
Marine Raider vinyl decal
GARY M.
EXCELLENT QUALITIY , ALL AROUND , ACES
GOES GOOD WITH MY CREW OF SEALS .!! CHEERS !! ;p
Navy SEALs Vinyl Decal
Charles N.
Surface warfare
The Surface warfare sticker is nicely designed and detailed. Delivery was quick and application easy.
Surface Warfare Specialist SWS badge Vinyl Decal
Charles N.
Warfare devices
Searched all over and milvec.com was the only place that had the Navy Air Warfare device. Good quality and quick delivery.
Air Warfare Specialist decal
ZM
Quality. Period.
Have multiple orders and these decals last a better than any I buy from other vendors.
Fast delivery, easy-to-use..I only wish the lettering was a bit taller. I didn't realize that the measurements were for the width and not height when ordered.
Thanks for your order, all my decals are measured by the longest edge, it would be very difficult for people to know what size they'd need if it was the short edge, plus they would be priced a lot higher, especially for a tab that's much longer than tall. The letters on the tab are based on the real tab, I try to make all of my patterns close to the tab, patch or badge. Thanks again, let me know if there are any other decals you need.
Jason custom made this decal for me and I could not be happier. His decals are way better quality and much easier to apply than others. They don't stick to the paper when you're going to apply the decal and they stick to the glass when you're peeling the applicator back. I will go Milvec for all my decals from now on!
Thanks for your order and idea for another decal. Transfer papers are very picky, I've had some that didn't stick to the vinyl, I think I have a good one now. I also figured out that I was cutting the decals with too much pressure that made them stay on the paper sometimes. Let me know if you have any other ideas for decals.
Nobody made this type of hat for the IAG (Iraqi Assistance Group) that the MiTT teams served on in Iraq. Jason did an excellent job of designing this hat and Milvec produced it. Thanks!
